|
3.1 Registration & Your Product Serial
Number
Please record the model and serial number to keep
for reference. These are required for Product Registration and the
web-Update function. Also record the Product ID number from the
bar-coded label on the back of your manual (this Product ID number
is required for Technical Support).
This information is printed
on a label on the rear of the Master Controller (SV-BOX). The
serial number is circled in the label shown in Figure
1.
Figure 1 ˇV Product Serial Number
Label
 Figure 2
| A:Serial Number |
| B:Information update |
| C:EXIT |
| D:Checking
update |
| 3.1.1 Steps to
web-update |
1.In web-update the product serial
numbers are required (find a label on the rear of the
Master Controller (SV-BOX)(Figure
3)
 Figure 3
2.After you enter the product serial numbers,
click ˇ§checkˇ¨ for web-update, if you do not wish to
update this time, click "cross" to exit. (make sure
your pc is on-line while you have your web-update)
(Figure 4)
Figure 4
|
Note: if the screen shows
error ID number, please check the ID number again.
When the error message still shows up, call and ask
your dealer for a new product serial numbers.
When
the screen shows error2, check if your pc is on-line
or call the service center for help. (Figure
5.6) |
Figure 5 ˇ@ Figure 6
|
3.After click "checkˇ¨ for connecting
web-update, the screen with shows ˇ§Are you readyˇ¨
click ˇ§OKˇ¨ for update.(Figure 7)
|
 Figure 7 |
4. Update screen.(Figure
8) |
 Figure 8 |
5. When the system done with update, the screen
will display the new version, ˇ¨click ˇ§OKˇ¨ to
exit.(Figure
9) |
 Figure
9 | |
In order
to receive technical support, you should register online at:
http://www.1comedrum.com soon
after your purchase date.
|